USB 3.0 MQ01UBD100 TOSHIBA HDD PCB Logic Board G003250A

USB 3.0 MQ01UBD100 TOSHIBA HDD PCB Logic Board / Board Number: G003250A

PCB logic board number is: G003250A (Toshiba PCB board number begin with "G00***", printed on the board, not on the sticker. When you want to replace the boards, the replacement board must has the same board number with your original board.

Donor replacement Toshiba hard disk drive PCB G003250A. This PCB (circuit board,donor board,controller board) is intended for individuals attempting data recovery/hdd repair on hard drive. If your HDD firmware, date code and site code is different. You can swap the BIOS(ROM) chip from your original PCB to this replacement PCB, to make this donor PCB compatible with your HDD.

Real in stock: We have over 1,000 types of PCBs on offer, real in stock. 100% tested working before shipment.

Swapping the hard drive circuit boards, you should know:

• For Seagate, Western Digital, Samsung, Toshiba & Fujitsu hard drives, the Board Number must be the same.
• For Hitachi 3.5" & Maxtor hard drives, the Main Controller Chip number must be the same.
• For Hitachi 2.5" hard drives, the White Label number must be the same.
• PCB version: REV A, REV B, REV C, REV D, REV E, REV P1, REV P2 can be used as the same.