WD10EVVS WD PCB Controller Circuit Board 2060-701640-000 REV P1

WD10EVVS Western Digital PCB WD Hard Disk Drive Controller Circuit Board 2060-701640-000 REV P1

Main Controller IC:88I9045-TFJ2
HDD Motor Combo IC: L7251 3.1
Board Number: 2060-701640-000 REV P1
Suit for hard drives: WD5000AAKS, WD7500AADS, WD10EADS, WD10EAVS, WD10EARS, WD10EVVS, etc
Note: REV A, REV B, REV C, REV P1, REV P2 are compatible, ship randomly by default, contact us if you need a special revision;

Please read before your purchasing:
1. All PCB have been 100% tested Working before shipping. If the PCB is faulty during shipping, please inform us immediately after your received it;
2. Replacement the PCB only can solve the problem that is caused by the PCB faulty; However, HDD failures may not always caused by the PCB faulty. We cannot guarantee your drive can be repaired by replacing the PCB;
3. Please change the BIOS/Main Controller IC from original PCB to the replacement PCB, to make the replacement PCB compatible with your HDD;
4. Import duty, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility;

Most HDD boards have the unique BIOS(ROM or NVRAM chip) which includes the unique data to access the HDD system area. If the BIOS information is not compatible with your HDD, there is no way to read the HDD's data. Because of this, we should use the original PCB's BIOS when we swap PCB. BIOS CHIP SWAPPING IS A MUST.

Real in stock: We have over 1,000 types of PCBs on offer, real in stock. 100% tested working before shipment.