Shared with Friends

FAQs

Q: I think I have a faulty board. I have west digital wd100emaz-00wjta0. P/n 2w10228. S/n 2yj2grhd. SATA 256mb cache. Date 10 aug 2018. Any help would be greatly appreciated. more

WD5000AAVS WD PCB Controller Circuit Board 2060-701640-001 REV A

  • Model: P102267_2060-701640-001
  • Shipping Weight: 95g
  • 50 Units in Stock
  • Manufactured by: Western Digital

Starting at: $39.99  $24.99
Save: 38% off

Please Choose:

Tool






Add to Cart:

WD5000AAVS Western Digital PCB WD Hard Disk Drive Controller Circuit Board 2060-701640-001 REV A

Main Controller IC:88I8945-TFJ2
HDD Motor Combo IC: L7251 3.1
Board Number: 2060-701640-001 REV A
Suit for hard drives: WD5000AADS, WD5000AAVS, WD5000AVDS, WD5000AVVS, WD5000AAKS, WD6400AADS, WD10EADS, WD10EALS, WD10EAVS, WD10EVDS, WD10EVVS, WD15EADS, WD15EVDS, etc
Note: REV A, REV B, REV C, REV P1, REV P2 are compatible, ship randomly by default, contact us if you need a special revision;

Please read before your purchasing:
1. All PCB have been 100% tested Working before shipping. If the PCB is faulty during shipping, please inform us immediately after your received it;
2. Replacement the PCB only can solve the problem that is caused by the PCB faulty; However, HDD failures may not always caused by the PCB faulty. We cannot guarantee your drive can be repaired by replacing the PCB;
3. Please change the BIOS/Main Controller IC from original PCB to the replacement PCB, to make the replacement PCB compatible with your HDD;
4. Import duty, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility;

Most HDD boards have the unique BIOS(ROM or NVRAM chip) which includes the unique data to access the HDD system area. If the BIOS information is not compatible with your HDD, there is no way to read the HDD's data. Because of this, we should use the original PCB's BIOS when we swap PCB. BIOS CHIP SWAPPING IS A MUST.

Real in stock: We have over 1,000 types of PCBs on offer, real in stock. 100% tested working before shipment.

This PCB has two types:

Type 1
Type 1

Type 2
Type 2

Swapping the hard drive circuit boards, you should know:

  • For Seagate, Western Digital, Samsung, Toshiba & Fujitsu hard drives, the Board Number must be the same.
  • For Hitachi 3.5" & Maxtor hard drives, the Main Controller Chip number must be the same.
  • For Hitachi 2.5" hard drives, the White Label number must be the same.
  • PCB version: REV A, REV B, REV C, REV D, REV E, REV P1, REV P2 can be used as the same.

Copyright © 2024 HardDiskPCB.com All Right Reserved.